You are currently browsing the category archive for the ‘event’ category.
Have you visited the NCECA web site lately?
For those who are not potters, NCECA is the “National Council on Education for the Ceramic Arts”. Their objective is to enrich and promote the ceramics through education. Most people know NCECA for its annual conference they put at different locations across the country, their exhibitions, and publications.
One of their upcoming events will be a symposium this fall in Jingdezhen, China!
NCECA/Jingdezhen Ceramic Institute International Symposium –
Shared Journeys: Chinese/American Ceramic Art Education
October 22 – November 2, 2008
On the Preview page of the Symposium are slideshows from around Jingdezhen, the Ancient Kiln Museum, as well as a few great Quicktime videos of people there skillfully making and decorating pots, all compiled by Richard Burkett and Joe Molinaro when they were there earlier this year .
The pure magnitude of some of the pots produced there and the skill of the craftsmen is, to say the least, somewhat humbling. ..five foot platters, 4×8′ handmade porcelain tiles, 6/9/12+ foot tall urns… almost unfathomable, especially to those who have worked in porcelain before and know its finicky and particular nature.
So what is their secret? Apparently, I was told, the porcelain in Jingdezhen isn’t like the smooth plastic body we know here in the west, in fact its not very plastic at all, but they have learned to work with this. They throw thick There’s a picture of one segment of a particularly large pot on the Symposium page being thrown by a team of 3 people. For large pieces such as the massive urns pictured on the website, sections are thrown separately, let dry to bone dry, then the segments are bonded together using slip. Once that’s done, they trim the assembled vessel and decorate.
There are still some spots available too.. I sure wish I could go.
Regional artists of various mediums, not just clay, donate a piece of work: their interpretation of a bowl.
Friday, November 16th, 6 to 9 pm
Cathedral Square Gallery, 260 Dauphin St, Downtown Mobile
Tickets: Just $35 from the 15 Place web site
“…eat hearty soups, drink assorted beverages, munch on artisan breads and gourmet cookies, dance to a great band, BAYRUNNER this year, and at the end of the evening take our bowl home.”
Once again this year our self-representing artist collective of local and regional working artists, The Coastal Artisans, will be holding our Annual Christmas Art Show and Sale on the first Saturday of December at the Mobile Botanical Gardens.
This will be our second year and will once again be held in conjunction with the Garden’s Master Gardeners Christmas greenery and Poinsettia Sale.
To learn more about this event and our artists, please visit our website:
Today is Blog Action Day when blogs everywhere talk about one thing: the environment.
Potters tend to have a reputation for being frugal. Some stems from necessity, some stems out of principle. I started thinking about ways in which we here at the studio try to make a difference to the environment and recycle:
– Building: recycled wood & windows in building studio (reclaimed lots of waste wood from hurricanes which would otherwise be taken to landfill or burned).
– Plastics: We recycle grocery bags & use them for shows (people don’t mind when you tell them it is for the environment) as well as dry cleaning plastic which works perfect for covering pots & protecting controlling how they dry
– Paper: Newspaper and newspaper roll ends are used in the studio for a multitude of uses. Also excellent for packing pots away for/at shows
– Metal: We bought a can crusher and while they don’t pick up recycled items here, we take our tin/aluminum cans to the recycle depot when we are in town.
– Appliances: We have two defunct refrigerators & freezers make excellent damp cupboards and places to keep moist clay.
– Old Machinery: our clay mixers are 2 recycled old machines: one is made from an old WWII anti-aircraft gun and the other a 1915 dough mixer.
– Waste wood & pine needles: We get scrap wood cast offs from the local wood mill and use them to fire the wood kiln. Wood and pine needles burn much more efficiently and with less smoke at the temperatures we fire the kiln to, than it would in a burn pile.
– Cast offs: We use cast-off bisque ware (cracked and unusable) in holes in our driveway, and try to use as many of the glazed cast-offs as bird feeders, planters, dog bowls, etc.. Lots of other shards go to a friend who does mosaics. (We have also used waste oyster shells from the local fishery to fill holes in the driveway – smells a bit at first, but definitely organic)
– Our clay: Now that our clay mixer is operational again, we try to pay extra attention these days to recycle all of our scrap clay into a new batch of mixed clay and make it go as far as possible. A lot of the clay we use, we dig ourselves. The white and bubble gum colored clay that we like to use is considered waste clay to contractors (not good for road base) and they are quite happy if we cart as much as we like off.
– Organic Gardening: We try our best to garden as organically as we can. We have several neighbors with horses that are glad to part with their more than ample supply of muck.
– Commuting: Our little chunk of land houses both where we live and the studio, so thankfully I don’ t have to commute anywhere (except to shows, wholesale customers, and some of my suppliers, of course).
With a group of like-minded artists, we also started a small artist collective to hopefully open up more marketing opportunities closer to home and cut back on travel. Less traveling not only saves us expense, time, and wear and tear on our vehicles (and us) but also means less fuel consumed and less impact on the environment.
Coming from away, I couldn’t help but notice the absence of things such as public transit for commuters and carpooling lanes when I first got down here. SUVs are the vehicle of choice it seems here and its not uncommon to see a Hummer or 2 cruising up the road. No attention to carbon emissions on old vehicles either. Big cars, big boats and often big inefficient houses too. How do permits get granted to construct on valuable wetland? Always has baffled me how a place with so much sunshine has so few people taking advantage or even the slight bit knowledgeable of solar power. Welcome to the Alabama Coast. Consuming with very little thought of conservation. You used to be able to see to the bottom of Mobile Bay not 50 years ago, apparently. Not now though. Pollution from industry-friendly Mobile and other places upstream have unfortunately taken its toll. Its a pity.
Southerners are known to be resistant to change but hopefully they will sit up and take notice before it is too late.
The Gulf Coast Kiln Walk Society, out of Navarare, Florida, has some pretty cool and exciting things coming up this fall, including the second firing of their 32 foot anagama kiln which they built and fired for the first time last year.
Mr Masayoshi Shimizu from Iwade City, Japan, will be arriving November 27th to orchestrate the firing which will take place the first week of December.
Events relating to the firing include:
- Dec 2-4 – Glazing and loading of the kiln
- Dec 4 – The Ceremonial Lighting of the Anagama Kiln
- Dec 16 – 9:00 am Kiln opening
- Dec 16 – 9:00 am – 4:00 pm – 1st Annual Woodstoke Pottery Festival
While the deadline for members to submit a piece to the firing has passed, its a great opportunity to and see a master at work and find out what the excitement of an anagama firing is all about.
Mr Shimizu will also be holding a master class and slide presentation at the University of West Florida on Wednesday, Nov 29.
As per the Kilnwalk calendar, please note that all events are free and open to the public. Please click on the links above or call 850-939-2744 for more info.
Hope to see you there!