You are currently browsing the category archive for the ‘Studio’ category.
This photo was from last night before I started glazing. Oh yeah, there’s a ware rack outside the shot besides this lot as well. I am glad to say its now all glazed and in a lit kiln, finally. I’m relieved. In the morning I’ll load another bisque load, now that things are finally dry, and probably fire the gas kiln again Wednesday night.
The weather is fantastic tonight. Clear skies, 73 F, and (a rare occurance) no wind blowing across the clearing toward the kiln (and burners). How nice for being out by the kiln and firing! This is a relief after a summer of incessant rain. I was getting so tired of having to wear my muck boots seemingly everywhere to trudge through orange mud and puddles, not to mention having to deal with the headaches of trying to navigate my car strategically up our driveway without getting sucked down into a pot hole and stuck! Anyways, everything is drying up nicely and I am back to wearing flips and birks.
I’ve mentioned before that we’ve been working on expanding the studio for a while now. Its actually been an ongoing project for a long time.. scrape together a few dollars, buy a few more boards and nails. I would just love to be able to have all the materials on hand and get it done in one fell swoop so I could get back to some sense of order and normalcy, and maybe take on some students again, but for now, this is the way it is. This afternoon Lowell headed off to the recycling place in town to trade in some cans and metal stuff that was lying around, to clear up around and get a little pin money, I suppose. Well evidently he ended up having more than I thought because he came back with these. “These will look great in the studio upstairs!”, he said, with a big silly grin across his face.
Yesterday I was just getting ready to cut and slam wedge some native clay that had been sitting on the wedging table to dry out, as I often do to pick out the odd little rock or left over hard chunks of debris. Found this little fellow “hunkered down”, as they would say here in the South. He had chewed and burrowed his way about an inch into the clay.
Earlier in spring and summer, we are pestered by some much smaller black beetles, resembling this one, actually, only about 1 to 2 millimeters in length. They come out once the sun goes down and make their way into the studio, seeking out leather-hard pots and damp clay. Groups of them will actually burrow right through the sides of pots. Sometimes I think they make a point to go for those pots you have spent the most time on trimming or carving a design into …pure coincidence, of course.
Since we don’t have screens on the windows and the studio is kind of open, we usually try and wrap or cover pots with dry cleaner’s plastic. We have to also make sure we turn the lights to the studio off when we leave, since they don’t seem to nibble in the dark.
When you first start learning how to make pottery, you follow your teacher’s lead. You follow the same techniques, use the same tools, and emulate your teacher as best as you can. You take what you learn with you throughout your potting career. Lowell’s favourite thing to say to students as they start out is “First you learn the rules, then you learn there are no rules”. Sure, there are other ways to do the same thing, but as with learning a language, getting a good foundation in the fundamentals is important.
Over time and with experience, we all come to find techniques, tricks, or tools that work better for each of us. Its always fun visiting other peoples’ studios. I’ve noticed over the years that no 2 potters work in exactly the same manner. And potters, while for the most part a kind and friendly lot, are pretty quirky. The longer they work alone in their studio, it seems, the quirkier they get too. …but that’s another post for another day!
Right now I am throwing on an old Creative Industries wheel. I had been throwing on an even older Soldner wheel, up until August when, unfortunately, the 35 yr old motor finally bit the dust (hoping to repair it after this next show).
The chair I use to sit at it is actually an old stool from a yard sale, cut to height. The front legs are cut 2 or so inches shorter than the back legs which makes it less of a strain on my back when leaning over to throw. A low-tech and inexpensive way to work smarter and save your back.
There are a few things I like to have around the wheel:
– A straight sided 2 or 3 gallon water bucket – rim ideal for scraping excess slip off of my hands; clay particles settle nicely in bottom and don’t get stirred up each time I moisten my sponge.
– an old cup to hold my main throwing tools – pin tool, sponge, wooden knife
– a plastic rectangular container for ribs – not pictured, but is an recycled old baby wipes container . The size and shape is just right as was the price
– bats – on the left side of the wheel table there is usually a stack of 7″ Creative Industries square bats that I use for smaller items. They have 2 sets of notches molded on the underside to fit different bat pin spacings for both this wheel and the Soldner. Also have 12″ & 14″ round CI bats, and a few Plastibats (which are actually superior, very sturdy and don’t bend, but are unfortunately more expensive). Nice thing about these plastic molded bats is they never rot and seem to last forever. The drawback is they are more expensive, limited in sizes (nothing more than 14″ in diameter). The Creative Industries ones have a tendency to bend when pots being taken off the wheel, so you have to be extra careful.
– a kitchen scale – for weighing pieces of clay out for throwing
– a mirror – (not pictured) helps with seeing the contour of pots while both throwing and trimming. I threw for 2 weeks without one, bending to the side to see the profile, and not only did it kind of slow me down and make my neck/back hurt, but my pots looks different too.
– big table – (the one pictured here is an old door on sawhorses with canvas stretched over it). I will throw a series and when the table is full, get up and move the pots to ware racks.
There was one time I had bins of tools. (Can you have too many tools??) Well, I still have them, but I have narrowed it down to a few that I actually use regularly at the wheel:
– a pin tool;
– a wooden knife;
– a sponge (a medium sized natural sponge; cellulose sponges also work great in a pinch);
wooden ribs (a small kidney shaped and larger one, both Kemper);
– 2 Sherrill Mudtools – soft/red & hard/green (I like these because unlike a rubber rib they don’t break down and have so far kept their smooth edge; rubber ribs tend to break down within a few months in this climate);
a long metal rib;
– a chamois on a fishing bobber – stays floating in bucket so I don’t ever lose it and its easy to see; cutoff wires of different thicknesses;
– a metal scraper from hardware store;
– a Bison trimming tool
– a Giffin Grip
– a Grabber pad attached to one of my plastic bats mentioned above
– a 16″ square piece of plywood (very low tech) for trimming larger bowls and platters on.
– many sets of metal calipers for fitting lids
Since I moved my wheel outside, I’ve noticed a surprising number of new little creatures that I probably wouldn’t normally see on my usual trip to the studio. Gekkos, Red headed skinks (a lizard), blue racer skinks, crab spiders, a rainbow of different colored dragonflies, etc., all going about their business seemingly undisturbed by my presence and the constant hum of the wheel. A great place to look for design inspiration.
Saw this unusual little fellow hanging out on a loquat leaf around dusk. His/her body alone was close to an inch long. Always suspect of unusual looking bugs since moving to the south, I checked online to make sure he/she wasn’t venomous. From the Dave’s Garden web site (a great gardener’s resource, btw), I learned he/she was a “Green Lynx Spider (Peucetia viridans)” that loves to eat bugs (including wasps) but is not known to bite humans. I was glad to know that since the plants in that part of my garden, especially my gardenia, have had a bit of an aphid problem the last 2 yrs. I’m always in favor of a natural predator vs using pesticides.
I was throwing mugs today. My 3 1/2 year old wanted to smell the pots as they came off the wheel. She leaned very carefully over to give one of the wet pots a sniff.
“What smell like?”
I kept throwing and absently said “Uh.. mugs..?”
She huffed then said “No, Mommy. Not smell like mugs.. Smell like money!”
..little parrot pottery child..
Absolutely beautiful day out today, here on the coast. While I do miss my fall days in Canada, on days like today, they couldn’t be further from my mind. Low humidity, sunny, slight breeze, and in the 80s F.
The deck on the studio (all built from wood gathered from the beach after hurricane Ivan) was finally(!) cleared of the last bits of refuse scrap lumber today. Gave it a good sweep off, cut back the blackberry vines that were working very hard at taking over, and I was quite amazed at the transformation.
Once the spot was clear, I just went ahead and brought out my wheel. Not sure why I hadn’t thought of it before but I am so glad I did. Made for a much more productive day. I was able to be outside, have a clear view of my much happier 3 1/2 year old playing in her wading pool, and able to throw for a lot longer with relatively few interruptions. Even the dogs and cat were happier as everyone now had an equally prime spot beside my chair.